Casio QV-770 Manuale del Proprietario Scaricare il pdf (Pagina 19)

TROUBLESHOOTING

Cannot exchange data be-

tween two cameras

Cannot transfer data (error

keeps occurring)

Cannot perform infrared

data communication.

Auto Play starts even

though it is not selected.

1. Incorrect cable connection

2. Camera connected to is not turned on.

3. Function Switch sets to REC.

1. Sending camera’s memory is empty.

2. Receiving camera’s memory is full

3. Receiving camera’s Function Switch is in REC

position.

4. Low battery (indicated by

)

5. Disconnection of cable during data communica-

tion

1. Other device does not support IrTran-P protocol.

2. Sending and receiving units are not positioned

correctly.

3. Object blocking the infrared light path, another

device using infrared light is in the vicinity, or

fluorescent lighting.

4. Direct sunlight

Activation of screen saver.

1. Connect correctly (page 62).

2. Turn power on after connecting cable.

3. Set Function Switch to PLAY (page 62).

1. Correct the situation and try again.

2. Correct the situation and try again.

3. Change Function Switch setting of receiving

camera to PLAY (page 62).

4. Replace batteries or use the AC adaptor (page

16).

5. Securely reconnect the cable.

1. Communicate only with devices that support

IrTran-P protocol.

2. Orient the infrared ports of the two devices so

they are pointed directly at each other (page 67).

3. Move the sending and receiving devices away

from the source of the problem.

4. Avoid infrared data communication in direct sun-

light.

Turn off screen saver (page 40).

Other

Symptom Probable Cause Action

Error during data communication. Check cable connec-

tions and mode settings.

Indicates that movie recording is not possible because

camera memory is full.

Delete images no longer need or reduce the resolution of

some of the images in camera memory.

Problem with internal memory. Perform the following

procedure. The reset procedure described below can

also be used to recover from a memory error.

Important!

The following procedure deletes all images stored in

memory. You can use the optionally available connection

kit (LK-11/LK-12S/LK-22S) to make copies of images be-

fore deleting them.

1. Holding down

and

MENU at the same time.

2. After checking that the SYSTEM RESET message is

on the display, press the shutter button to perform a

system reset or turn power off if you do not want to

perform a system reset.

• Never turn off power while the system reset is in

progress! Doing so will damage camera memory are

require servicing by an authorized service provider!

• Be sure to power the camera using the AC adaptor or

a new set of alkaline or lithium batteries. Weak batter-

ies or manganese batteries can result in a power fail-

ure while the system reset operation is in progress,

causing damage to camera memory.

• If the MEMORY ERROR message continues to ap-

pear on the display after you perform the reset proce-

dure, contact your nearest CASIO service provider.

ERROR

FULL

MEMORY ERROR

#1, #3

CONSULT THE

OWNER’S MANUAL!

MESSAGES

After the final “SYSTEM RESET” confirmation message

appears, press the shutter button.

The display should return to normal after the system re-

set is complete.

Important!

• System reset can result in a change in the order of

images stored in camera memory.

• Corrupted images may be lost entirely.

• If image data is partially corrupted, parts of the image

may not be recoverable.

Problem with internal memory. Contact your dealer or an

authorized CASIO service provider.

Not enough memory for further recording. Delete some

images from memory or change resolution of stored im-

ages from FINE to NORMAL or NORMAL to ECONOMY

(page 24, 54).

No images are stored in memory.

Not enough memory for recording in current resolution

mode. Press

to change to another resolution

mode, delete some images from memory, or change

resolution of stored images from FINE to NORMAL or

NORMAL to ECONOMY (page 24, 54).

Problem with internal memory. Contact your dealer or an

authorized CASIO service provider.

MEMORY ERROR

#2, #4

CONSULT THE

OWNER’S MANUAL!

MEMORY FULL

NO IMAGE

REMAINING

SYSTEM ERROR

CALL TECH

SUPPORT

SYSTEM RESET

YES → SHUTTER

NO → CALL

TECH SUPPORT

SPECIFICATIONS

Recording System ............. Digital (JPEG base); PC Link software

can be used to input images in CAM,

JPEG, TIFF and other format.

Recording Medium ............ Flash memory (4MB)

Memory Capacity...............FINE: 30 images (minimum)

(Approximately 124KB compressed)

NORMAL: 60 images (minimum)

(Approximately 62KB compressed)

ECONOMY: 120 images

(Approximately 32KB compressed)

The above figures are approximations

only. The actual number of images de-

pends on image subject matter.

Up to 120 images

(total of

, , images)

Image Element ................... 1/4-inch CCD (Total Pixels: 350,000;

Effective Pixels: 330,000)

Computer Output image ...640 x 480 pixels

Lens .................................... Fixed focal point with macro position;

F2, f = 3.9mm

Aperture .............................. f2, f8 auto switching/fixed

Focus Range ......................NORMAL: 0.7m to ∞ (2.3' to ∞)

MACRO: 14cm to 16cm (5.5" to 6.3")

(From surface of protective lens.)

Light Metering.................... TTL center priority by CCD

Exposure Metering ............ Program AE, Aperture Priority AE

Exposure Range ................EV +5 to 18

Exposure Correction......... -2EV to +2EV (1/4EV units)

Type of

Operation

Continuous

Playback

Continuous

Recording

AA-size Alkaline

Batteries LR6

Approximately 190

minutes

Approximately 690

shots

AA-size Lithium

Batteries FR6

Approximately 320

minutes

Approximately 1,430

shots

Shutter ................................ CCD shutter

Shutter Speed .................... 1/8 to 1/4000 second

White Balance ....................Automatic, Fixed

Self-timer ............................10 seconds

Recording Modes .............. Single-image; Serial; Self-timer; Movie;

Panorama; Title; Macro

Flash Modes ....................... AUTO, ON, OFF

Monitor/Viewfinder ............ 1.8-inch TFT low-glare color LCD;

122,100 (555 x 220) pixels

Video Output ...................... NTSC

Infrared Communication .. IrDA1.0; IrTran-P compliant

Input/Output Terminals .... DIGITAL IN/OUT, VIDEO OUT, AC

adaptor connector

Power Supply ..................... Four batteries (AA-size alkaline or

lithium batteries)/AC adaptor (AD-

C620)

Power Consumption ......... Approximately 6.8 W

Battery Life

The values noted below indicate the number of hours before battery

failure under normal operating temperature (25°C), as estimated by

battery manufacturers. These values are for reference only, and do

not guarantee that any particular set of batteries actually will provide

the service life indicated. Low temperatures shorten battery life.

“Continuous Recording” is made without use of the camera’s flash.

Regardless of use of the camera’s flash, turning on and off the power

switch, as well as other operating conditions may affect the above

values.

Note: The above values are obtained based on Panasonic’s alka-

line batteries and Fujifilm’s lithium batteries.

They may vary if other manufacturer’s batteries are used. For your

reference, the values when the camera is operated with Duracell’s

batteries are shown below.

Dimensions ........................ 129(W) x 66(H) x 38(D) mm /

5" (W) x 2.6" (H) x 1.5" (D)

Weight ................................. Approximately 200g /

7oz. (excluding batteries)

Standard Accessories ...... wrist strap; soft case; video cable; four

LR6 alkaline batteries;owner’s manual

• The liquid crystal panel built into this camera is the product of pre-

cision engineering, with an effective pixel rate of 99.99%. This also

means, however that 0.01% of the pixels can be expected to fail to

light or to remain lit at all times.

SPECIFICATIONS

Type of Operation

Auto Play

Continuous Recording

AA-size alkaline batteries LR6

Approximately 100 minutes

Approximately 190 shots

1 2 ... 14 15 16 17 18 19

Commenti su questo manuale

Nessun commento

Casio QV-770 Manuale del Proprietario Pagina 19

Commenti su questo manuale

Prodotti e manuali riguardandi Fotocamere bridge Casio QV-770